PowerDrive Synthetic All Season TO-4

PowerDrive Synthetic All Season TO-4

Phillips 66 manufactures and markets four premier brands: Conoco, Phillips 66, 76 Lubricants and Kendall Motor Oil. These brands reach across every key lubricants market, including automotive, trucking, agriculture, aviation, power generation, mining and construction.

This tri-branded 5W-30 multigrade fluid is intended for use in transmissions, final drives and hydraulic systems of off-highway equipment requiring Caterpillar TO-4 performance oil.

  • Synthetic polyalphaolefin (PAO) base stocks formulation provides low-temperature performance for easy startability in frigid climate
  • Enhanced thermal stability for extended oil life under severe operating conditions
  • Protects critical parts against rust and corrosion, possesses high shear stability and good foam resistance and is compatible with a variety of seals and friction materials
  • Optimized frictional properties to prevent clutch slippage

 

Expand for more details on this Product

Synthetic Fifth-Wheel Grease

Product From AMSOIL Inc.

This heavy-duty lubricant is engineered to provide protection and performance in the harsh operating environments found in fifth-wheel hitches used in trucking and trailer applications.

  • Protects against wear and corrosion while withstanding high loads and pressures

PowerFuel

Product From Echo Inc.

ECHO PowerFuel is a pre-mixed fuel which incoporates Red Armor Oil to remove performance-robbing carbon deposits without sacrificing lubricaton or film strength. 

  • Developed at a 50:1 ratio and contains no ethanol. 

Technol 246 Diesel Sludge Dispersant

Product From Dieselcraft / Magnum Group LLC

The Technol 246 sludge dispersant breaks up and dissolves the sludge that settles at the bottom of diesel fuel tanks.

  • Converts hydrocarbon component, which represents 90% to 95% of waste volume, back into fuel

Delo 400 XLE Synblend SAE 10W-30

Product From Chevron Corp

The Delo 400 XLE Synblend SAE 10W-30 can deliver over 3% fuel economy improvement in Class 6 trucks relative to SAE 15W-40 diesel motor oils.

  • For naturally aspirated and turbocharged four-stroke diesel and gasoline engines calling for the API CJ-4 or SM service category and SAE 10W-30 viscosity grade

Rotella T6 0W-40 Synthetic Engine Oil

Product From Shell Lubricants

The Rotella T6 0W-40 full synthetic heavy-duty diesel engine oil uses free-flowing synthetic base oils that allow reliable pumping on start-up under extreme cold climate conditions.

  • Remains thick enough under high-temperature operation to protect against engine wear

Natural Gas Engine Oils

Product From Phillips 66 Lubricants

The Guardol NG and Kendall Super-D NG vehicular natural gas engine oils are for use in compressed natural gas (CNG) or liquefied natural gas (LNG) powered heavy-duty trucks.

  • Also compatible with other natural gas powered heavy-duty mobile equipment

Oil Eater Cleaner/Degreaser

Product From Kafko International

The Oil Eater cleaner/degreaser easily cuts through grease, oil and grime on engines, machinery, tools and other equipment.

  • Low-VOC, water based, biodegradable, non-corrosive, non-toxic and non-flammable

Spirax S6 ATF A295 Transmission Oil

Product From Shell Lubricants

Shell Spirax S6 ATF A295 synthetic automatic transmission fluid is approved against the Allison Transmission TES-295 specification for extended warranty and extended drain intervals.

  • Lasts up to 300,000 miles under normal conditions or 150,000 miles under severe conditions

Rando HDZ and MV Hydraulic Oils

Product From Chevron Corp

Rando HDZ oils (ISO 15, 22, 32, 46, 68, 100) are antiwear hydraulic oils formulated with premium base oil technology to protect hydraulic pumps against wear, rust and corrosion.

  • Multiviscosity feature of Rando HD Premium Oil MV promotes even and continuous power transmission over a wide temperature range with a minimum of shudder

Clarity Synthetic Hydraulic Oil AW

Product From Chevron Corp

Clarity Synthetic Hydraulic Oil AW (ISO 32, 46, 68) is designed to give maximum protection to hydraulic pumps in high-performance applications and environmentally sensitive areas.

  • Suitable for mobile and stationary vane-, piston- and gear-type pumps