- 7777 Washington Village Dr.
- Dayton, OH 45459
- Phone: 937-866-0711
- Fax:
- Website: http://www.daytonsuperior.com
Want to know more about Dayton Superior Request more information
Dayton Superior
Company Profile | Request More Information
-
Company Profile | Request More Information
-
-
More text exists for this Company and can be expanded
- Product From Dayton Superior
-
The DBR Splice System uses the D51 DBR Splice Bar combined with the D51A DBR Form Saver to perform in tension and compression in excess of a Type 1 (125% specified yield) splice.
- DBR Form Saver: Type 1, parallel threaded, female splicing bar utilizing a robust nailing flange and eliminating welded connections to prevent fatigue failures
- Product From Dayton Superior
-
The new Clear Cure VOC J7WB is a dissipating cure formulated for easy removal and does not interfere with adhesion of subsequent surface treatments once it has been removed.
- VOC-compliant, water-based, clear resin designed for use on freshly finished concrete as a membrane-forming curing compound
- Product From Dayton Superior
-
The Dayton Superior P-24 Delta Tie is an insulated tilt-up concrete panel connector.
- Eliminates thermal bridges and energy losses
- Non-metallic, non-corrosive design
- Can be oriented in the panel either on end or on side
- Product From Dayton Superior
-
The lithium-based Pentra-Hard Densifier is used to harden and dustproof new and existing concrete for industrial floors and concrete polishing procedures.
- Water-based solution penetrates into the concrete and reacts with free calcium to form insoluble calcium silica hydrate
-
C-68 Century Series Bridge Hanger
Product From Dayton Superior -
The C-68 Century Series bridge hangers are half hangers designed to support overhang formwork when stay-in-place metal decking is used on interior bays of a bridge deck.
- Laser cut, one piece design
- Available in hot-dipped galvanized or plain finishes from 7,000 to 12,000 lbs. of Safe Working Load
- Product From Dayton Superior
-
The new Single Use Void Former from Dayton Superior was developed as a cost-effective, high-performance alternative to the standard urethane void former for precasters. The easy-to-assemble, two-part, snap-together design is made of high-density polyethylene plastic. The unit uses standard lifting hardware and is available for both 0.444 in. and 0.671 in. P75 utility anchors.
- Product From Dayton Superior
-
The Taper-Lock Form Saver from Dayton Superior is a taper-threaded, mechanical splicing system brings together the benefits of the Dowel Bar, Dowel-In Splicing System and Taper-Lock technologies into one product. The product is available in sizes #4 through #11. The system performs in tension and compression in excess of a Type 2 (160% specified yield) splice. Its integral nailing flange is available in small or clipped sizes for attachment to formwork. For use in buildings, bridges, parking garages and more.
- Product From Dayton Superior
-
- Fits rebar #3 to #11
- Covers height ranges from 3 to 7 3/4 in.
- Staple down feature and two sizes per chair
- Product applications include side form spacer, tilt-up, precast and D.O.T. projects
- Product From Dayton Superior
-
Dayton Superior's Sure Finish is designed to make leveling the imperfections of new and old concrete surfaces simpler and easier.
- High polymer-modified, cement-based product
- Can be applied from a true feathered edge up to 1/2-in. thick for skim coating and flash patching